The carpet in your home experiences a lot of foot traffic on a daily basis and this can create all sorts of messes. When this happens, you might immediately consider vacuuming as a solution since it’s a proven method of keeping your carpets looking and smelling their best. However, regular vacuuming doesn’t always solve the dirt and grime problem, and you may end up looking at alternative methods for this.
To ensure you know what’s best for your carpet, here are some pros and cons of the different ways of cleaning your carpet.
Dry Cleaning with Absorbent Compound
Dry carpet clean services, as the name suggests, use a process that is popular for carpet cleaning in Brooklyn, which cleans without water. During the process of dry cleaning a carpet, an absorbent compound is spread over and then the professionals work the carpet using a mechanized brush or counter-rotating brushes. All the soil and dirt particles are absorbed by this compound, mostly in powder form, and the process takes no longer than 10 minutes. Once the dirt is absorbed by the powder cleaner, professionals use a high-suction vacuum leaving the carpet spotless.
Pros
- Very simple system with no special technical training required
- Drying time is less
- The carpet is back in service in 20 minutes
Cons
- Cleaning powder may get stuck in carpets
- Cannot be cleaned deep in the carpet
- Excessive dust can occur in the home Source: Pristine Green
Wet Cleaning
The carpet is first pre-conditioned with a chemical reagent in order to saponify or liquefy soils and oil based substances which may be present. Water at a temperature near its boiling point and a pressure of 50 to 500 psig is then injected into the carpet and after a suitable dwell time (usually 10 to 15 minutes), the resulting solution is extracted with a vacuum of 5 to 14 inches HG.
Pros
- Gets out soiling from deep down in the carpet.
- Allows the use of high temperatures, pressures and chemical concentrates.
- Permits extended dwell times for reaction of cleaning solvents.
- Chemical reactivity facilitated by agitation with grooming tool or extraction wand.
- This is the method most widely recommended by carpet manufacturers and industry cleaning experts and professionals.
Cons
- Relatively long drying time. This can be reduced with the use of powerful equipment by competent technicians.
- Expensive equipment usually required for maximum efficiency.
- Relatively high-cost factors. Source: AJS Carpet Cleaning Inc.
Steam Carpet Cleaning
Steam cleaning involves the application of a superheated liquid through a high-pressure applicator to break down dirt and bacteria or any other debris on the carpet. Usually, the carpet will be pre-conditioned to loosen the dirt and other substances before the hot water is injected and extracted using a vacuum.
Pros
- Steam cleaning deeply cleans the carpet thanks to the chemical concentrates, high temperature, and pressure.
- It expands the fibers leaving your carpet looking and feeling smoother and softer after each clean.
- It eliminates around 90% of bacteria and dirt buildups and neutralizes allergens.
Cons
- Since steam cleaning is a wet technique, the carpet requires time to completely dry after the wash.
- It poses mold and mildew issues without proper drying.
- The technique costs high for the equipment needed and cleaning services are therefore relatively high as well. Source: Clean Corp
Make sure to consider your options carefully so that you won’t end up messing your carpets in the process. If you want a professional’s approach to carpet cleaning, just let us know and we’ll take care of it. Just reach out to us by dialing the number listed below!
